VELUX Modular Skylight – Ridgelight 25°–40°
The ideal daylight solution for buildings with large roof openings.
Ridgelight 25–40° is a classic rooflight solution, where two rows of VELUX Modular Skylights are connected at the ridge. With venting skylight modules on both sides is an optimal solution for buildings that require day or night cooling.
The Ridgelights can be supplied with different types of glazing on each side to control heat and glare according to the orientation of the building.
The self-supporting solution is suitable for flat rooflights and ridgelights with a roof opening width of between 1.1 and 4.5 m for fixed modules and 1.4 to 4.5 m for venting modules.
Values | |
---|---|
Uw value: | up to 0.5 W (m2/K) |
Ug value: | up to 0.86 W (m2/K) |
Water resistanc: | Class E1200, EN 12208: 2000 |
Minimum dimensions required | |
---|---|
Module width: | 675–1000 mm |
Module height: | 600–3000 mm |
Roof opening width for fixed modules: | 1100–4500 mm |
Roof opening width for opening modules: | 1400–4500 m |
Installation pitch of the daylight system: | 25°–40° |
Opening casement: | |
---|---|
Modules | alternate modules can be opened by an integrated chain actuator |
Opening height: | the comfort ventilation daylight module opens up to 410 mm |
SHEV opening height: | the smoke ventilation daylight module opens up to 700 mm in under 60 seconds |
Double- or triple-glazed insulating glass
- Insulating glass (Ug values up to 0.5 W (m2/K))
- Tempered outer pane
- Laminated safety glass on the inner side
- Protection against falling glass
- Sound insulation (traffic, rain and hail)
- “Warm edge” spacer (protects insulation performance over time and minimises the risk of condensation on the edges of the pane)
- Step glass (drains water away from the pane)
- Solar control coating (optional)